v1.3.0 — Security & Stability
BMS Gateway
Industrial Modbus TCP ↔ BACnet/IP protocol bridge.
Flash in under 90 seconds — no IDE, no drivers required.
BACnet/IP · Port 47808
Modbus TCP · Port 502
SubscribeCOV
ReadPropertyMultiple
Vendor ID 260
Live Log Viewer
ISA 101 Web HMI
Installation Steps
- Connect your ESP32-S3 (8 MB flash minimum) via USB.
- Click Install below and select your COM port.
- Wait for the flash to complete — approximately 60–90 s.
- On first boot, join the AP BMS-Gateway-Config (pw: admin1234) and open http://192.168.4.1.